Beacon Machine CR909 Common Rail Fuel Injection Pump Test Bench

Struggling with multiple diagnostics tools? The CR909 Test Bench unifies Common Rail, HEUI, and EUI/EUP testing. Features more than 10,000 built-in data plans for precise calibration of Bosch, Denso, and Delphi systems. Boost your shop's efficiency today.

WhatsApp: +86-13570429157

Tel / Wechat: 0086-13570429157

Email: ellenzhang@beacon-machine.com

Quick Order

Introduction

CR909 Diesel Fuel Injection Test Bench

The functions below distinguish the standard configuration from options. Confirm the relevant part numbers and required adapters for the ordered machine.

Standard configuration functions

Test common rail solenoid injectors.
Test common rail piezo injectors.
Test common rail high-pressure pumps.
Test Denso HP0 pumps.
Test HEUI injectors using separate fuel and engine-oil circuits; basic C7, C9 and 3126B fixtures are included.
Test EUI and EUP components with the included TU-D cam box.
Test HEUI actuation pumps (HEUP).
Test CAT 320D high-pressure pumps.
Generate injector compensation codes for supported Bosch, Denso, Delphi and Siemens injectors.
Two high-pressure rails: one for injector testing and the other for pump testing.
Forced cooling.
Automatically control test speed and rail pressure during the programmed test sequence.
Measure and record fuel flow.
Generate test reports.
Multilingual control software.

Optional functions

TU-C cam box for EUI/EUP testing.
TU-E cam box for EUI/EUP testing.
Additional EUI/EUP adapters for the selected applications.
Additional HEUI fixtures for compatible CAT 3412E, Navistar, Isuzu and Ford applications.
Test Euro II mechanical injection pumps.
Test VP37 and VP44 pumps.
Test RED4 pumps.
Test Denso V3, V4 and V5 pumps.
Test Cummins PT injectors.
Test Cummins PT pumps.
Test compatible Cummins HPI, Q60 and X15 applications.
Test CP4 pumps with the corresponding adapters.
Test Denso HP5, HP6 and HP7 pumps with the corresponding adapters.
Test Bosch four-pin injectors with the corresponding harness and fixture.
Delphi E3 dual-pulse control function.
Configuration for testing 2 injectors.
Configuration for testing 4 injectors.
Configuration for testing 6 injectors.
Configuration for testing 8 injectors.
BIP signal testing.
AHE injector dynamic-stroke measurement with the corresponding measuring tools.
ZME metering-unit testing.
Rail-pressure sensor testing.
DRV/HPV pressure-control valve testing.
Solenoid-valve testing.
Injection advance-angle testing.

parameter

Specification	Details
Model	CR909
Main Engine Power	15 kW (Standard)
Voltage	380V 3 Phase
Standard Testing	Common Rail Injectors/Pumps, Piezo, HEUI, EUI/EUP
Cooling System	Forced Cooling
Dimensions	230 × 155 × 220 cm
Weight	1300 KG