Beacon Machine Manufacturing Co.,ltd

Language
  • defaultDefault Language
  • enEN
  • ruRU
  • esES
  • deDE
  • elEL
  • itIT
  • jaJA
  • koKO
  • ptPT
  • idID
  • srSR
  • ukUK
  • viVI
  • thTH
  • trTR
  • msMS
  • beBE
  • arAR

product DETAILS

  • PQ1000S Pneumatic Common Rail Injector Test Bench
  • PQ1000S Pneumatic Common Rail Injector Test Bench
  • PQ1000S Pneumatic Common Rail Injector Test Bench
  • PQ1000S Pneumatic Common Rail Injector Test Bench

PQ1000S Pneumatic Common Rail Injector Test Bench

PQ1000S pneumatic injector test bench for sealing, spray, injection-volume and return-flow checks. Supports solenoid and piezo common rail injectors.

Quick Order

Introduction

PQ1000S Pneumatic Common Rail Injector Test Bench

The PQ1000S uses an air-driven pump to supply test pressure for mechanical high-pressure injectors and solenoid or piezoelectric common rail injectors. It combines pressure gauges, measuring tubes, an injector holder and an electronic controller for workshop testing.

Functions and applications

  • Sealing checks — Check injector sealing under test pressure.
  • Spray inspection — Observe the injector spray pattern and atomization.
  • Volume measurement — Measure injection volume and return flow with the measuring tubes.
  • Electronic control — Adjust injector pulse width, frequency and injection count.
  • Electrical checks — Use the controller to measure injector resistance and operate solenoid injectors.
  • Pneumatic pressure supply — Regulate the air-driven pump through the air-pressure controls.

parameter

Technical specifications

Model: PQ1000S

Test pressure range: 0–160 MPa

Maximum fuel supply rate: 1.2 L/min

Tank capacity: 3 L

Power supply: 220 V, single-phase, 50/60 Hz

External air input: ≤0.8 MPa

Pulse width: 100–3000 μs

Injection frequency: 1–30 Hz

Injection count setting: 0–2000; 0 selects continuous operation

Operating environment: Dry, dust-free indoor location; approximately 15–35 °C


*Test data from Beacon laboratory